A Powder Based Polyaniline Carbon Paste Electrode for Urea Analysis

A new polyaniline carbon paste electrode prepared by mixing polyaniline (emeraldine), nafion, graphite powder and urease for urea analysis was exploited. The ratio of polyaniline, nafion, urease and graphite for the construction of the electrodes and the optimal conditions for urea determination were studied. The detection limit of this sensor for urea is 5 μM and the linearity from 5 μM to 7.5 mM is obtained in FIA. This sensor has a response time of 90s and shows good reproducibility and stability (RSD, 6.3%, n = 43). The blood samples from a patient during blood dialysis were taken and analyzed. The urea concentrations in blood obtained from this sensor are comparable with urea test kit method.     

Cation-induced synthesis of new polyoxopalladates

Seven polyoxopalladate compounds, [Pd(15)(SeO(3))(10)(μ(3)-O)(10)](10-), with Na(+) (1) and K(+) (2) as counterions, and Na(6)[M(II){Pd(12)(SeO(3))(8)(μ(4)-O)(8)}]·nH(2)O (M = Co (3), Zn (4), Ni (5), Cu (6), Mn (7); n = 7-9), have been prepared and characterized by SXRD, FT-IR, UV-vis, EA, TGA, and ESI-MS. These compounds comprise two distinct cluster configurations, {Pd(15)} and {M(II)Pd(12)}, which reveals the possibility of obtaining desired noble metal clusters with a certain nuclearity by using different cations as potential structural directing or template agents in synthesis. All compounds showed apparent absorptions in the visible light region, while 3 and 7 were found to show paramagnetic behavior typical of mononuclear Co(II) and Mn(II) complexes with zero-field splitting.     

Different growth regimes on prepatterned surfaces: consistent evidence from simulations and experiments

Molecule deposition on a prepatterned substrate is a recently developed technique to generate desired structures of organic molecules on surfaces via self-organization. For the case of prepatterned stripes, the time-resolved process of structure formation is studied via lattice Monte Carlo simulations. By systematic variation of the interaction strength, three distinct growth regimes can be identified: localized growth, bulge formation, and cluster formation. All three growth regimes can be recovered in the experiment when choosing appropriate organic molecules. Some key microscopic observables, reflecting the properties of the structure formation, display a non-monotonous dependence on the interaction strength.     

Optimal pairwise and non-pairwise alchemical pathways for free energy calculations of molecular transformation in solution phase

We estimate the global minimum variance path for computing the free energy insertion into or deletion of small molecules from a dense fluid. We perform this optimization over all pair potentials, irrespective of functional form, using functional optimization with a two-body approximation for the radial distribution function. Surprisingly, the optimal pairwise path obtained via this method is almost identical to the path obtained using a optimized generalized "soft core" potential reported by Pham and Shirts [J. Chem. Phys. 135, 034114 (2011)]. We also derive the lowest variance non-pairwise potential path for molecular insertion or deletion and compare its efficiency to the pairwise path. Under certain conditions, non-pairwise pathways can reduce the total variance by up to 60% compared to optimal pairwise pathways. However, optimal non-pairwise pathways do not appear generally feasible for practical free energy calculations because an accurate estimate of the free energy, the parameter that is itself is desired, is required for constructing this non-pairwise path. Additionally, simulations at most intermediate states of these non-pairwise paths have significantly longer correlation times, often exceeding standard simulation lengths for solvation of bulky molecules. The findings suggest that the previously obtained soft core pathway is the lowest variance pathway for molecular insertion or deletion in practice. The findings also demonstrate the utility of functional optimization for determining the efficiency of thermodynamic processes performed with molecular simulation.     

Quantification of glutathione in plasma samples by HPLC using 4-fluoro-7-nitrobenzofurazan as a fluorescent labeling reagent

A rapid and highly sensitive high-performance liquid chromatograpy method with fluorescence detection has been developed for determination of glutathione (GSH) in human plasma. A simple pre-column derivatization procedure with 7-flouro-4-nitrobenzo-2-oxa-1,3-diazole (NBD-F) reagent was employed. The separation of the derivatized glutathione was performed using a mobile phase consisting of phosphate buffer (0.02 mol/L, pH 6.0)-acetonitrile (77:23, v/v) at a flow rate of 1.0 mL/min with the column temperature 2°C. The eluted derivatives were fluorometrically detected at an excitation wavelength 470 nm and an emission wavelength 530 nm. Under the optimum chromatographic conditions, the calibration curve was linear over the range of 0.1 μmol/L to 10.0 μmol/L with the correlation coefficient of 0.9988. The precision of the method was satisfactory with the intra- and inter-day coefficient of variation being 6.3%, 6.9%, respectively. This method has been used to determine glutathione concentrations in plasma samples from healthy individuals.     

Synthesis and NMR Spectroscopic Characteristics of a Series of Hydrazide‐Hydrazones Containing Furoxan Ring Derived from Isoeugenoxyacetic Acid

A novel hydrazide, 2‐methoxy‐4‐(3‐methyfuroxan‐4‐yl)‐5‐nitrophenoxyacetylhydrazine, was prepared from isoeugenoxyacetic acid. The hydrazide was condensed with aromatic aldehydes to give a series of 20 hydrazide‐hydrazones incorporating the furoxan ring. The structure of obtained compounds was determined by analytical and spectral data. It was demonstrated that the two sets of resonance signals in the ¹H‐NMR and ¹³C‐NMR spectra of the examined hydrazide‐hydrazones are caused by E_N–C(O) and Z_N–C(O) conformers. The energy barriers for the conformation exchange were determined by ¹H‐NMR‐measurement at various temperatures. Among seven tested hydrazide‐hydrazones, four compounds exhibit inhibition activities in vitro on human epidermis carcinoma (KB‐cell) with IC₅₀ = 47, 68, 79, and 103 μg/mL.     

Proteomics of cypress pollen allergens using double and triple one-dimensional electrophoresis

Italian cypress (Cupressus sempervirens, Cups) pollen causes allergic diseases in inhabitants of many of the cities surrounding the Mediterranean basin. However, allergens of Cups pollen are still poorly known. We introduce here a novel proteomic approach based on double one‐dimensional gel electrophoresis (D1‐DE) as an alternative to the 2‐DE immunoblot, for the specific IgE screening of allergenic proteins from pollen extracts. The sequential one‐dimensional combination of IEF and SDS‐PAGE associated with IgE immunoblotting allows a versatile multiplexed immunochemical analysis of selected groups of allergens by converting a single protein spot into an extended protein band. Moreover, the method appears to be valuable for MS/MS identification, without protein purification, of a new Cups pollen allergen at 43 kDa. D1‐DE immunoblotting revealed that the prevalence of IgE sensitization to this allergen belonging to the polygalacturonase (PG) family was 70% in tested French allergic patients. In subsequent triple one‐dimensional gel electrophoresis, the Cups pollen PG was shown to promote lectin‐based protein‐protein interactions. Therefore, D1‐DE could be used in routine work as a convenient alternative to 2‐DE immunoblotting for the simultaneous screening of allergenic components under identical experimental conditions, thereby saving considerable amounts of sera and allergen extracts.     

Reactive Polymer Coatings: A General Route to Thiol‐ene and Thiol‐yne Click Reactions

Reactive polymer coatings were synthesized via chemical vapor deposition (CVD) polymerization process. These coatings decouple surface design from bulk properties of underlying materials and provide a facile and general route to support thiol‐ene and thiol‐yne reactions on a variety of substrate materials. Through the reported technique, surface functions can be activated through a simple design of thiol‐terminated molecules such as polyethylene glycols (PEGs) or peptides (GRGDYC), and the according biological functions were demonstrated in controlled and low‐fouling protein adsorptions as well as accurately manipulated cell attachments.     

Synthesis,structure, and photophysical property of series of Ln(III) coordination polymers with different carboxylato ligands (Ln = Sm,Eu)

Four Ln(III) coordination polymers, {[Ln₂(1,3-bdc)₃(H₂O)₄]·DMF·H₂O} _n (Ln = Sm 1, Eu 2) and [Ln₂(mal)₃(H₂O)₆] _n (Ln = Sm 3, Eu 4) (1,3-H₂bdc = isophthalate acid, H₂mal = malonate acid), were hydrothermally synthesized and characterized by single-crystal X-ray diffraction, elemental analysis, IR spectra, UV–Vis–NIR absorption spectra, and fluorescence spectra. The structural analyses reveal that polymer 1 is a 3D coordination polymer. Its asymmetry unit contains two crystallographically independent Sm(III) ions, both are eight-coordinated. The 1,3-bdc^2? anions show three different coordination modes. The structure of polymer 2 is isomorphous with that of 1. Polymer 3 is also a 3D coordination polymer, its asymmetry unit contains one Sm(III) ion, which is nine-coordinate. The mal^2? anions have two different coordination modes. The structure of polymer 4 is isomorphous with that of 3. The luminescent study shows that polymers 1, 2, and 4 exhibit characteristic emission bands in the visible region, corresponding to the transitions of the Ln(III) ions. By comparison and analysis of luminescence, it is found that the incidence of the same ligand on the corresponding spectra of different Ln(III) ions is different, and the influence of different ligands on luminescence of the same Ln(III) ion is also very different.

     

Impact of environmental conditions on the sorption behavior of UO<Subscript>2</Subscript><Superscript>2+</Superscript> onto attapulgite studied by batch experiments

The sorption of UO₂ ²⁺ from aqueous solution on attapulgite was investigated as a function of contact time, solid content, pH, ionic strength, foreign ions, humic acid (HA), and fulvic acid (FA) under ambient conditions by using batch technique. The attapulgite sample was characterized by XRD and FTIR in detail. The results indicated that the sorption of UO₂ ²⁺ was strongly dependent on pH and ionic strength. The sorption of UO₂ ²⁺ on attapulgite increased quickly with rising pH at pH < 6.5, and decreased with increasing pH at pH > 6.5. The presence of HA or FA enhanced the sorption of UO₂ ²⁺ on attapulgite obviously at low pH because of the strong complexation of surface adsorbed HA/FA with UO₂ ²⁺ on attapulgite surface. Sorption of UO₂ ²⁺ on attapulgite was mainly dominated by ion-exchange or outer-sphere surface complexation at low pH values, but by inner-sphere surface complexation at high pH values. The results indicate that attapulgite is a very suitable adsorbent for the preconcentration and solidification of UO₂ ²⁺ from large volumes of aqueous solutions because of its negative surface charge and large surface areas.